My partner hsd yhe 2012 quattro where part of the caliper wraps around the disc. Can you tell me what size spanner i need to remove the entire caliper please ao i can go and buy one today. Can you cinfirm the spanner or socket required to remove the caliper carrier is 21mm
@@autodocuk wanted to avoid buying an entire socket set as mine only goes up to 20 mil and normally enough for little maintenance info on my own cars. I'm not sure I still have the manual for it but I recon it is a 21, it is on the s line carrier. Anyway wish me luck. Videos are very good by the way
It is not necessary to bleed with this replacement, however, it is important after installing new pads/discs and before starting to move, adapt by pressing the brake pedal a couple of times, thereby you will bring the pads to the brake disc. AUTODOC
We cannot tell you for sure. In order to answer your question, we need more data about your car. Contact our support team and we will definitely try to answer your question. Our Customer Support team is always ready to help you to find compatible car parts fot your car and you can get in touch with us via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact AUTODOC
Well, thanks for the content,. One question though and maybe an idea for a future video... In this video the rotor and pads seems like they are in a good condition, can u explain what was wrong with them, when should I think about changing the brakes even if they "look" fine?
Thank you for comment. The replacement of the pads depends on wear, if your pads are equipped with a wear sensor, then when the pads are erased you will notice a signal indicator on the dashboard, if there is no wear sensor, you should regularly check the pads and if their thickness decreases to critical, which is recommended by the manufacturer, then they should be replaced. Best Regards, Autodoc team
Helpful video! My car had a wear indicator sensor on one pad on passenger side which was a pain to disconnect and very fragile. Would be helpful if there were tips on how to unclip. Cheers
Very useful now i can try to do it myself and get it properly done taking my time and learning new skills
Thank you for sharing your opinion with us.
Very helpful - Thank You
No complaints, a good video
My partner hsd yhe 2012 quattro where part of the caliper wraps around the disc. Can you tell me what size spanner i need to remove the entire caliper please ao i can go and buy one today. Can you cinfirm the spanner or socket required to remove the caliper carrier is 21mm
We cannot tell you for sure. You can find this information in the technical documentation for repairing your car.
@@autodocuk ok thank you
@@autodocuk wanted to avoid buying an entire socket set as mine only goes up to 20 mil and normally enough for little maintenance info on my own cars. I'm not sure I still have the manual for it but I recon it is a 21, it is on the s line carrier. Anyway wish me luck. Videos are very good by the way
Hi.
Do you need to bleed brakes when changing pads and rotors?
Cheers
It is not necessary to bleed with this replacement, however, it is important after installing new pads/discs and before starting to move, adapt by pressing the brake pedal a couple of times, thereby you will bring the pads to the brake disc.
AUTODOC
What dimensions did you install on front and on the rear wheels?
We cannot tell you for sure. In order to answer your question, we need more data about your car. Contact our support team and we will definitely try to answer your question.
Our Customer Support team is always ready to help you to find compatible car parts fot your car and you can get in touch with us via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact
AUTODOC
Well, thanks for the content,. One question though and maybe an idea for a future video...
In this video the rotor and pads seems like they are in a good condition, can u explain what was wrong with them, when should I think about changing the brakes even if they "look" fine?
Its a tutorial
Thank you for comment.
The replacement of the pads depends on wear, if your pads are equipped with a wear sensor, then when the pads are erased you will notice a signal indicator on the dashboard, if there is no wear sensor, you should regularly check the pads and if their thickness decreases to critical, which is recommended by the manufacturer, then they should be replaced.
Best Regards,
Autodoc team
Helpful video!
My car had a wear indicator sensor on one pad on passenger side which was a pain to disconnect and very fragile. Would be helpful if there were tips on how to unclip.
Cheers
Good 👍👍👍
شكرا لكم
Just saved myself $450 in labor. 🙏🏼
Thank you for sharing your opinion!
Easier on this version, my 2010 the slider bracket wraps around the disk
Why is there missing a bolt?
Please specify the exact time of the video fragment.
@@autodocuk about 4:13